Tuesday, May 14, 2013

Types of Utility Meter Locks, Barrel Lock


Locking a utility meter is one of the ways to keep people from tampering with it, but it presents a unique difficulty. Meter locks must be accessible to repair personnel and the utility company, which means they must be universally unlock-able but still difficult to tamper with. here bellow you will see how a meter key works.

Barrel Locks
·         Barrel locks are small metal rod-shaped locks. They have angled heads that help prevent gripping and, potentially, pulling them out, and they are difficult to break out of the lock. It can only be opened with keys issued by the company, and the keys are only issued to individuals who have been vetted and registered with the company that issues the lock, making them very safe.
Wire Locks
·         Wire locks use a piece of wire that wind around a plastic core. These locks are very flexible and can be used in a variety of situations. The thing that makes them so flexible--the wire--also makes them weaker as locks because the wire can be cut.
Ring Lock
·         These locks can be used instead fo a barrel lock; they have a bolt that locks into a plastic case. They must be removed with a special tool, and, because they clamp down on the meter, it's difficult to get a wire cutter or blade under the ring to pop it off or cut it. The locks are tamper evident, so it's easy to know when someone has been trying to pop it.

Monday, May 13, 2013

Barrel Lock Meter Key, Meter lock key, How To Open A Barrel Lock?


If you have installed a gas meter in your home or a commercial setup, you need to ensure that it is secured. Securing your meter with a gas meter key will help you protect the appliance from damages, fraud or theft. Meters that are not properly encased or secured are prone to damages as they are exposed to rain and other problems. Continuous water seepage into the meter can damage the appliance over a period of time. This can also affect the functioning of the meter, thus giving you inaccurate meter readings. Therefore, make sure to add a good quality tamper proof locking system when installing gas meters. is recommend to use a barrel lock meter, our a barrel lock meter key, our a barrel lock key, also you can call utility power company like Edison and they will install a barrel lock to your electric meter, gas meter, water meters 
In most of the setups today, gas cylinders are placed at another location within the building and connected to cooking devices through a gas line. A separate common plumbing system is used to connect and power several equipment’s simultaneously. The gas meter is also an important part of this plumbing system. It records the amount of gas used and determines the amount of your gas energy bill. This meter most often is placed outdoors for easy access and quick meter readings. Because the meter is placed outside, there are high chances of the appliance being tampered by unauthorized people and also there are chances of the device getting damaged due to wind, rain and dust. To eliminate all such problems, you will have to buy a gas monitoring equipment to secure this important device.
When purchasing a gas meter locking system, you can consider the following factors. Location of the gas monitoring system, reasons for keeping your gas meter under lock and key, who are the people who will have access to the meter box and whether you would need a spare gas meter key along with the original key.
Purchasing good quality gas products should be your first priority as these products are hazardous. Any compromise on the quality means putting many lives at risk. Therefore, you should not only buy gas products and other accessories made of high quality materials, but also choose to buy them from a trusted and highly reputed online store that sells only genuine gas equipment's  spares and parts. There are some reliable online stores that exclusively specialize in selling wide range of gas products and also offer installation, repair and maintenance services. You can easily shop for these products and services directly from the store's website. web sites i recommend http://www.barrellockmeterkey.com

Sunday, May 12, 2013

Using A Barrel Lock Meter key To Open A Barrel Lock, Barrel lock removal, Meter lock key


The concept of opening a barrel type lock with barrel lock meter keys is quite simple when you understand the basics. For example, a barrel lock that is typically used on a wide variety of utilities such as gas, electric and water it is a highly specialized type lock. It is a cylinder type lock that is impervious to being tampered with or being cut.
The lock is also unique because it uses a very specific type key. The key is known as a barrel lock meter key and comes in many varieties and models. Having the right key for the right lock is essential to the proper functioning of this lock and key system.
Contractors And Professional Utility Workers
It is also important to note that different utility companies around the country in various states use different types of cylinder locks or barrel locks on their utility meters. Those wishing to match a barrel lock meter key to a particular barrel lock or cylinder lock must first know which utility company has installed the particular lock.
Contractors and professional utility workers seeking to replace outdated or misplaced keys must first ascertain which key they require. In many cases cylinder locks and barrel locks have an identifying number located directly on the lock.
A Plunger Type System That Injects A Rod
Once a contractor or utility worker has determined the specific type lock that they desire to open they can then request the associated meter key for that lock. One note of caution for those using meter keys to open meter locks is that these devices are delicate and must be handled so as not to damage them. The barrel lock meter key uses a plunger type system that injects a rod directly into the center of the barrel lock.

When this process is reversed and the rod is pulled out of the cylinder lock the bottom of the lock releases and unlocks. As an added note it is always a good idea to keep barrel locks and barrel meter keys away from dirt and mud that can clog these precision pieces of equipment. visit our website at http://www.barrellockmeterkey.com

Saturday, May 4, 2013

Electric Meter Barrel Lock Key, How to Open a Barrel Lock?


During remodeling and building projects, it can become necessary to remove an electric meter and box and relocate it to a new position on the structure. Most of the time, this process is done in the opposite direction. The new meter box is mounted and readied for the meter to be inserted into it. At that time, the old meter is removed and plugged into the new box. However, if both the box and the meter are being relocated, then it is necessary to remove the meter and box before moving it.
Instructions
1
Turn off the electricity to the structure before opening the meter box. In most cases, this will require a call to the electric company for them to come out and disconnect the service. Use a pair of wire cutters and snip the metal seal on the meter box so that the box can be opened.
 2
Open the meter box. Grip the electric meter with both hands and pull it toward you. The meter will unplug from the meter box. Carefully, set the meter some place safe where it can be stored until you are ready to plug it into the box at the new location.
 3
Place a ladder next to the location of the meter box and climb up and use a wrench to disconnect the three large connectors that hold the utility cables to the cables coming from your weather head connected to your meter box. Loosen and remove any clamps that hold the weather head to the structure. A wrench or screwdriver will be needed to remove these clamps.
 4
Locate the wire coming out of the bottom of the meter box that runs to the ground rod nearby. The ground rod will be sticking out of the ground near the foundation of the house. Use a wrench to loosen the clamp and pull the wire loose from the rod. Try to pull the rod out of the ground. If you cannot work it loose, you may need to replace it at the new location.
 5
Loosen the three lugs in the lower half of the meter box with a wrench. Pull all three wires out from under the lugs and out of the meter box. Remove the screws inside the meter box that hold the box to the building. Use a cordless electric drill with the correct type of bit for this task. The meter box and weather head should now be free from the building.
 6
Carry the entire assembly to the new location where it is to be mounted. Measure up from the ground a distance of 5 feet and mark the spot on the wall. Hold a level just above the spot and draw a level straight line across the area where the meter box will be installed.
 7
Place the bottom of the meter box along the line and drive the screws through the back of the box and into the wall. Pull the three wires coming from inside the building into the meter box. The two power cables will either both be black or one will be black and the other will be red. It does not matter which one is attached on what side. Slide the ends of the cables under the two lugs in the center of the lower half of the meter box and tighten the lugs with a wrench.
 8
Slide the end of the white ground cable into the lug in the vertical middle of the box and off to one side. Tighten the lug with the wrench. Use a hammer and drive the ground rod into the ground near the foundation of the building and under the meter box. Use a wrench to re install the clamp and fasten the ground wire to the rod.
 9
Use the ladder and a wrench to reattach the clamps to hold the weather head in place on the side of the building. Plug the meter back into the meter box and shut the lid. Call the utility company to come and turn the power on and complete the hook ups. Normally, the power company prefers to make the overhead connections at the top of the weather head. They will also put a new wire seal on the meter box.
 Tips & Warnings
Never open a meter box until after the electricity has been turned off.
OUR IF YOU NEED A  BARREL LOCK METER KEY  TO REMOVE THE THE METER  GO TO OUR  WEB SITE AT http://www.barrellockmeterkey.com  our call us 951-545-8822

How to Unlock any Barrel/Cylinder Lock

Learning how to unlock any barrel lock or cylinder lock is quite easy and generally requires following a few simple steps. For example, there are a number of excellent and highly informative videos available online that give outstanding instruction on how to quickly and easily open a barrel/Cylinder lock. Most would agree that a video is one of the easiest and simplest ways to visualize how a particular lock can be opened quickly and efficiently.  The following link is one such example of a video that offers a highly educational and informative explanation of this process.


For those seeking this type of information it is important to note that there are many variations to the barrel lock or cylinder lock that must be addressed. One of the best ways to determine which lock you are working with is to check for a small series of numbers located either along the side or on top of the lock in question. A qualified and experienced professional that deals with barrel locks and cylinder locks will use this number to determine precisely which key is best suited for that particular lock. Using this method to ascertain which key will work for which particular lock can save individuals time and trouble in the long run.
There are so Many Variations of the Barrel Lock or Cylinder Lock type Mechanism
In addition, different regions of the country will typically have different locks installed depending on the electrical utility company or water utility company that is involved. For example, CON-ED or a New York City utility company may use one type of key while an electrical utility or water utility company in California may use a completely different lock and key system. Because there are so many variations of the barrel lock or cylinder lock type mechanism it is important to know which utility company you are dealing with and which specific lock based on its serial number is involved. Once these issues have been addressed it is generally quite easy to unlock one of these unique and cleverly designed locking mechanisms.
These Keys are Generally Delicate and Require Careful Handling to Avoid Damage
Knowing how to use a barrel lock meter key to unlock a barrel or cylinder lock is quite easy when you follow these simple steps as outlined here. In addition, the video referenced here is an excellent resource for understanding how the barrel block or cylinder lock functions and how the barrel meter key is used to open this type of lock. With the growing complexity of all types of utility meters including smart meters and more complex water meters it is important for individuals working with this type of equipment to understand how these barrel locks and cylinder locks function. Another important aspect of working with the barrel lock meter key is that these keys are generally delicate and require careful handling to avoid damage. Unlike conventional locks these locks are more precise and require delicate handling by anyone working to unlock a barrel lock. here are some web- site you can look at http://www.barrellockmeterkey.com